Produse pentru allpremed hydro dm (15)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg

Absorbant huiles et hydrocarbures, fioul Absorbe rapidement les taches d’huiles, d’essence, de cambouis, de gras et de peinture. Assure la propreté et la sécurité des sols où il y a la présence d’huile ou autres liquides. Peut absorber jusqu’à 150% de son volume (en fonction de la substance). Également recommandé pour le sol de la cuisine en cas de présence de gras important. Destiné aux professionnels chargés d’interventions nécessitant une absorption très rapide : plombiers, nettoyage des parkings extérieurs et intérieurs, transports des liquides, risque de pollution etc, tous les garages et toutes les stations services, les cuisines de collectivités, les arrêts de bus en ville, les industries… Réf:AB830 Conditionnement:Boite poudreuse 1 L – Carton de 6 Ex:AEXASORB'UIL

Il est un biofertilisant foliaire à base de Zinc et Cuivre complexés avec hydracided’acide citrique, obtenu de forme naturelle.Il agit aussi comme correcteur de carences avec une petite quantité de Zinc et Cuivre, avec un haut niveaud’efficience fertilisant et avec une basse consommation énergétique par la plante.En conséquence on améliore l’état physiologique de la plante et il augmente indirectement la défensenaturelle, induit une meilleure résistance au stress et aux maladies produites par bactéries etchampignons. Il est un biofertilisant foliaire à base de Zinc et Cuivre complexés avec hydracided’acide citrique, obtenu de forme naturelle.Il agit aussi comme correcteur de carences avec une petite quantité de Zinc et Cuivre, avec un haut niveaud’efficience fertilisant et avec une basse consommation énergétique par la plante.

Wir bieten Wirkstoffe zum Einsatz in humanmedizinische oder veterinäre Arzneimittel mit entsprechender ausführlicher Dokumentation und Zertifizierung. Die Firma “Hommel” blickt auf eine fast 125 jährige Historie zurück. Wir liefern hochwertige Substanzen an die Pharma-, Lebensmittel- und Kosmetikindustrie. Hommel hat sich durch langjährige Erfahrung, hohe Flexibilität und stetige Zuverlässigkeit weltweit einen guten Ruf für seine Lieferung von Rohstoffen erworben. Unsere Kunden verlassen sich auf eine prompte und unkomplizierte Belieferung. Wir bieten Ihnen pharmazeutische Wirkstoffe sowie Hilfsstoffe und andere Substanzen aus unterschiedlichen Produktionen und oft mit mehreren Alternativen an. Unser Unternehmen verbindt langjährige Praxis mit moderner Technik und bietet Ihnen stets beste Qualität zu einem fairen Preis.

Solvent

HyalOne 60 mg Injection is used to treat pain in osteoarthritis patients who have not received adequate relief from simple pain medications or exercise and physical therapy. In adults over the age of 21, it is also used in plastic surgery to reduce wrinkles or folds on the face and to enhance the lips. HyalOne is a sterile, non-pyrogenic, and highly elastic injectable solution, which is based on purified sodium hyaluronate produced by bacterial fermentation of a high-molecular-weight fraction of hyaluronic acid. Hyaluronic acid is a substance naturally occurring in many tissues of the body, including cartilage and synovial fluid. It is a principal component of synovial fluid responsible for its viscosity and elasticity. Being a natural lubricant and shock absorber, hyaluronan is indispensable for proper joint function.

AZELASTIN

Solution Hydro Alcoolique – Bidon De 5l Caractéristiques:Solution hydroalcoolique recommandée par l’OMS pour l’antisepsie rapide des mains Certificats:Cf fiche sécurité, taux alcool sup à 70% Minimum de commande:1 palette de 64 ou 128 bidons Stock actuel:11 000 bidons de 5L (entrepot ile de France) Production journalière:5000 bidons de 5L Packaging:Palette de 128 bidons de 5L Délai de livraison:2 jours (nous consulter en amont)

APRAZOL 30 MG 14 MIKROPELLET CAPSULE

Application: ElectrophoresisGenetic testing : Amides Storing temperature: 2-8°C GHS pictogram: GHS07GHS08 Shipping condition: ambient Synonym: Propensäureamid 2-Propenamid Acrylsäureamid IUPAC: Prop-2-enamide Appearance: clear colorless solution Code:1107 Manufacturers:GERBU

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

AZELASTIN

HUMIRA 20MG0,2ML INJECTOR

BIOSYNTHETIC HUMAN INSULIN

ESMOLOL HYDROCHLORIDE